[Preformat]
1="INQU invalid bus selector" 						              
2="INQU invalid function selector"					  
3="INQU invalid timeout value"						
4="INQU invalid parameter"		    				                 
5="INQU inquiry fail"		    					                        
6="INQU disconnect"		    						                        
7="INQU reattach error"		    					                          
8="INQU mode sense error"		    				                         
9="INQU mode select error"		    				                      
10="NAND invalid bus selector"		    			                      
11="NAND invalid function selector"		    		                         
12="NAND invalid timeout value"		    			                       
13="NAND invalid parameter"		    				                      
14="NAND erase block error"		    				                      
15="NAND get map error"		    					                       
16="NAND configurate SSD Info. error"				                        
17="NAND configurate device error"		    		                         
18="NAND configurate project info. error"		                            
19="NAND read PINF error"		    				                       
20="NAND write PINF error"		    				                        
21="NAND read physical block status error"		                             
22="NAND execute error"		    					                        
23="NAND scan initial defective blocks error"		                        
24="NAND check ready busy error"		    		                       
25="NAND flash physical read error"		    		                        
26="NAND flash physical write error					                         
27="NAND read spare data error"		    			                         
28="NAND set spare data error"		    			                        
29="NAND write spare data error" 		    		                        	
30="NAND read parameter page error"	   				                        
31="NAND set PINF block address error"		    	                        
32="NAND read sorting info. error" 					                        
33="NAND config. scramble error"					                        
34="NFTL invalid bus selector"			    		                        
35="NFTL invalid function selector"			    	                         
36="NFTL invalid timeout value"						                        
37="NFTL invalid parameter"	    					                        
38="NFTL get information error"		    			                       
39="NFTL get L2P mapping table error"	    		                       
40="NFTL get physical block state table error"	   	                        
41="NFTL start NFTL error"		    				                        
42="NFTL stop NFTL error" 							                        
43="NFTL get versoin error"							                         
44="NFTL get erase count error"			    		                     
45="PM invalid bus selector"			    		                         
46="PM invalid function selector"					                        
47="PM invalid timeout value"	    				                       
48="PM invalid parameter"		    				                       
49="PM incorrect system descriptor error"	    	                     		
50="PM incorrect system descriptor length error"   	                      
51="PM write partition error"		    			                       
52="PM write system descriptor error" 				                        
53="PM write customer application partition error"	                         
54="PM write image file error"			    		                      
55="PM read capacity error"				    		                        
56="PM set partition error"							                         
57="PM read partition error"	    				                        
58="PM read system descriptor error"   				                         
59="PM read customer application partition error"  	                         
60="PM set key error"							   	                        
61="PM set security partition status error"			                       
62="PM start security partition error" 				                      
63="PM stop security partition error"				                        
64="PM toggle write protect partition error"		                       
65="PM get supported system IDs error"				                        
66="EXEC invalid bus selector"						                         
67="EXEC invalid function selector"	    			                         
68="EXEC invalid timeout value"   					                         
69="EXEC invalid parameter"					  		                      		
70="EXEC firmware program fail"						                       
71="EXEC download program image fail"				                      
72="LEDC invalid bus selector" 						                         
73="LEDC invalid function selector"					                         
74="LEDC invalid timeout value"						                     
75="LEDC invalid parameter"							                        
76="LEDC control error"								                         
77="PINF invalid bus selector"	    				                       
78="PINF invalid function selector"   				                        
79="PINF invalid timeout value"					  	                        		
80="PINF invalid parameter"							                        
81="PINF read capacity error"						                        
82="PINF read PINF block error" 					                         
83="PINF write PINF block error"					                         
84="PINF erase block error"							                    
85="TEPF invalid bus selector"						                         
86="TEPF invalid function selector"					                        
87="TEPF invalid timeout value"	    				                         
88="TEPF invalid parameter"   						                       
89="TEPF execute fail"					  			                         		
90="SPTI invalid parameter"							                         
91="SPTI test unit ready error"						                        
92="SPTI inquiry error" 							                        
93="SPTI read capacity error"						  
94="APTI invalid parameter"							                   
95="SPTI invalid parameter"							              
96="SCSI invalid parameter error"					                         
97="SCSI read error"	    						                         
98="SCSI write error"   							                        
99="SCSI read ex. error"					  		                         
100="SCSI write ex. error"							                        
101="ATA invalid parameter"							                        
102="ATA read error" 								                         
103="ATA write error"								  
104="ATA read ex. error"							                  
105="ATA write ex. error"							               
106="RAID invalid parameter"						                      
107="RAID read error"	    						                        
108="RAID write error"   							                        
109="RAID read ex. error"					  		                    
110="RAID write ex. error"							                  
111="Preformat status function fail"				                       
112="That is not ONFI DDR Flash" 					                       
113="Group A pages of PINF is not enough"			  
114="Group A pages is not enough"					                  
115="Allocate PINF fail"							               
116="LINF verify fail"								                         
117="PINF verify fail"	    						                         
118="Get firmware file fail"						                         
119="Set capacity fail"						  		         
120="Set Serial Number fail"						                   
121="Serial number lenth too large"					                         
122="Boot firmware fail" 							                        
123="Build FW Loc. fail"							   
124="Get PINF Page fail"							 
				
				
[Sorting]	
1001="sorting event function fail" 					               
1002="sorting status function fail"					   
1003="sorting set parameter fail"						
1004="sorting get parameter fail"		    			                   
1005="sorting set pattern fail"		    			                          
1006="sorting set table fail"		    				                         
1007="sorting erase fail"		    					                             
1008="sorting write fail"		    					                       
1009="sorting read compare fail"		    			                         
1010="sorting get result fail"		    			                         
1011="sorting is not TLC flash"			    		                         
1012="sorting power on/off fail"		    			                        
1013="sorting set feature fail"		    			                         
1014="sorting set block mapping fail"		    		                   
1015="sorting bad blocks too much"   					                       
1016="sorting not support multi channel/multi bank"	                    
1017="sorting data length mismatch"		    		                     
1018="sorting set alpha table fail"		   			                        
1019="sorting verify IDBT fail"		    			                      
1020="sorting quick parameter fail"		    		                        
1021="sorting invalid sorting level"		    		                    
1022="Sorting user stop"		    					                        

1025="PF error allocate memory"		    			                         
1026="PF error struct version or length"		    		                   
1027="PF error load idbt"   					                       
1028="PF error load 1p idbt"	
                    
1029="PF error load 2p idbt"		    		                     
1030="PF error mark erasefail block"		   			                        
1031="PF error allocate system blocks"		    			                      
1032="PF error generate pg0 groupa map"		    		                        
1033="PF error build ldbt"		    		                    
1034="PF error build pmtinfo"

1035="PF error build l2pblock"		    			                      
1036="PF error build pgtblock"		    		                        
1037="PF error uiniform setting"		    		                    
1038="PF error auto switch"                  
1039="PF error set scramble table"

1040="PF error read BMT table fail"
1041="PF error read PG table fail"
1042="PF error read bad column fail"
1043="PF error load SLC IDBT fail"
1044="PF error return capacity fail"



[Booted]

2000="Format Fail!"

2001="Copy Test Fail!"

2002="Partition Fail!"

2003="Check FAT Fail!"

2004="Preload fail!"

2005="Get Disk Letter fail!"

2006="Create Handle fail!"
